Data logger / GSP-6 / USB / temperature -40°C ~ +85°C / humidity 10% ~ 99% /16000 records

Data logger / GSP-6 / USB / temperature -40°C ~ +85°C / humidity 10% ~ 99% /16000 records

The GPS-6 data logger is equipped with two external temperature and humidity sensors with a length of 2 meters.

The temperature measurement range is from -40°C to +85°C, and the humidity range is from 10% to 99% RH.

The device allows to make up to 16,000 records of measured temperature and humidity. Combined with the free Elitechlog software, the device can be set at what interval to log data from 10sec until 24h It can also set start-stop mode, record mode, multiple alarm thresholds, auto shorten recording interval, °C/°F unit, etc.

•The temperature measurement range is -40°C ~ +85°C with an accuracy of ± 0.3°C;
• Humidity measurement range is 10% ~ 99% RH with an accuracy of ±3% RH
• Up to 16,000 temperature and humidity points.
•Equipped with one external temperature sensor and one external combined
temperature-humidity sensor. (set up via Elitechlog Software).
• Alarm mode: sound, light, screen alarm
• Large LCD display for easy reading of reported data,
alarm status, etc.

Software

Is available for free download. Easy to install and use, the software allows easy setup of the sensors to monitor the required temperature and humidity.

Also allow setting multiple alarm thresholds and start-stop mode

Temperature range:	-40 ℃ ~ 85 ℃
Temperature unit:	℃ or ℉
Temperature accuracy:	±0,5 ℃ (-20 ℃ ~ 40 ℃； ±0,1 ℃
Humidity range:	10 %~99 %
Humidity accuracy:	±3%RH (25℃, 20%~90%RH); ±5%RH
Temperature resolution:	0,1 ℃
Humidity Resolution:	0,1 % RH
Ambient temperature:	-30 ℃ ~ 70 ℃
Large recording capacity:	16,000 toch
Adjustable recording interval:	10s~24h
Fast response time:	ѵ
Ability to set an alarm for excessive temperature:	ѵ
Available MAX/MIN values:	ѵ
2.8 inch LCD display:	ѵ
Sound and light alarm:	ѵ
Power supply 3.6V CR14505 lithium battery or USB power supply:	ѵ
Size:	165 x 99 x 66 mm